The Fastest Method for Rooting Cuttings of鸳鸯茉莉 (Yuan-yang Moli)
The web tells everyone about the fastest method for rooting cuttings of Yuan-yang Moli and introduces the skills and illustrations for cutting and rooting茉莉 (Jasmine) in the green plant and flower aspect. Let's learn together.
Jasmine is a plant that loves light and requires long daylight hours, prefers hot and humid climates, and is afraid of the cold. Under direct sunlight, it is most suitable for Jasmine's growth and development. If there is insufficient light or shade, Jasmine leaves become larger and thinner, the leaf color turns light green, and its growth and development are poor. The stronger the light, the more developed the roots of Jasmine are, the healthier the plant grows, and the stronger its resistance.
The propagation of Yuan-yang Moli usually adopts the cutting or layering method. As long as the temperature is above 20 degrees, cuttings can be made at any time. However, it is generally done in spring in conjunction with pruning. Coarse sand is used for cuttings, and roots can grow in more than twenty days. After生根, the cuttings are placed in a shady place for a period of time and then gradually exposed to light. Layering propagation can be carried out in May and June, selecting strong and sturdy branches from one to two years old. After pressing for more than forty days, roots can grow, and then they are cut from the mother branch and planted in another pot. Like cutting seedlings, they are gradually exposed to light after more than ten days and enter normal management.
Cutting Propagation
Cutting Medium: This is the soil or materials such as river sand and peat used for cutting. It is difficult for home cuttings to get an ideal cutting medium due to limited conditions, so it is recommended to use a pre-made and sterilized cutting medium; medium-coarse river sand can also be used, but it should be rinsed several times with clean water before use. Sea sand and river sand from saline-alkali areas should not be used, as they are not suitable for the growth of flowering plants.
Selection of Cutting Branches: For softwood cuttings, in late spring to early autumn when the plant is growing vigorously, select the current year's robust branches as cuttings. After cutting the branches, select the strongest parts and cut into segments 5-15 cm long, each with more than 3 leaf nodes. When taking cuttings, note that the upper cut should be about 1 cm above the upper leaf node and cut flat, while the lower cut should be about 0.5 cm below the lowest leaf node and cut diagonally, with both cuts smooth (the knife should be sharp).
The Fastest Method for Rooting Cuttings of鸳鸯茉莉 (Yuan-yang Moli)
For softwood cuttings, in late spring to early autumn when the plant is growing vigorously, select the current year's robust branches as cuttings. Cut into segments 5-15 cm long, each with more than 3 leaf nodes. The upper cut should be about 1 cm above the upper leaf node and cut flat, while the lower cut should be about 0.5 cm below the lowest leaf node and cut diagonally, with both cuts smooth (the knife should be sharp).
For hardwood cuttings, after the early spring temperature rises, select the robust branches from the previous year as cuttings. Each cutting usually retains 3-4 nodes, and the cutting method is the same as for softwood cuttings. The medium selection suggests using a pre-made and sterilized cutting medium; medium-coarse river sand can also be used but should be rinsed several times with clean water before use. Maintain a temperature of 20°C-30°C and keep the relative humidity of the air at 75-85%, with appropriate misting, 3-5 times a day, depending on the weather.遮光 50-80%.
Layering Propagation
Select strong branches and strip the bark in a circle about 15-30 cm below the tip, with the width of the wound about 1 cm and the depth just enough to strip the epidermis. Cut a piece of film 10-20 cm long and 5-8 cm wide, place some moist garden soil on it, and wrap the ring-stripped part like wrapping a wound, with the upper and lower ends of the film tied tightly and the middle bulging. Roots can grow in about four to six weeks. After生根, cut the branch together with the roots, and a new plant is formed.
The above introduction by the Green Plant Enthusiast website on the fastest method for rooting cuttings of Yuan-yang Moli and the full content of the skill illustration for cutting and rooting Jasmine, hope it is helpful to the Green Plant Enthusiasts!