When is it suitable to repot Milan
This introduction provides information on when it is appropriate to repot Milan, a green plant related to flowering plants. It is a great tip worth collecting!
When is it suitable to repot Milan
Milan can be repotted in February to March during spring when the climate is warm, which is more suitable for the plant's recovery. If you want to repot in winter, choose to do so at night or on cloudy and rainy days, with temperatures around 10 to 20 degrees Celsius. After repotting, water thoroughly and place it in a well-ventilated, shady area. Water every 2-3 days later, providing 10-12 hours of scattered light daily.
Milan Repotting Time
Milan is usually repotted because the root growth space is insufficient or the roots are rotting or dead. If not repotted in time, it can lead to Milan's inability to grow normally, resulting in withering and death, which is irreversible.
Milan flowers prefer a warm and humid environment and can be repotted in February to March during spring when the climate is warm, making it more suitable for plant recovery. If you want to repot in winter, choose nights or cloudy and rainy days, with temperatures around 10 to 20 degrees Celsius.
Methods and Steps for Repotting Milan
Before RepottingMilan needs to be controlled for water before repotting, stop watering, so when removing the pot, the plant can be directly turned out from the pot.
Preparing the PotMilan flowers can use plastic pots, unglazed clay pots, or ceramic pots. It is recommended to use fewer ceramic pots because they do not have good ventilation and drainage. The size of the pot should be chosen based on the size of the plant.
Choosing Soil MatrixMilan flowers prefer acidic soil, so the planting soil must be mixed with a sufficient amount of decomposed leaf soil or pine needle soil, combined with some garden soil and river sand, making it fertile, loose, and well-draining.
Steps for Repotting Milan1. Milan flowers have a developed root system. When removing the pot, all the soil should be detached. Stop watering 2-3 days in advance, wait for the soil to dry, use a spatula to circle around the pot, and lift Milan out of the pot entirely. Remove the old soil around the roots, keeping the root ball intact with about 70% of the original soil, and cut off the old and rotten roots of Milan.
2. Milan flowers prefer rich humus acidic soil. Choose loose and fertile humus soil and mix it with a little sand and mountain soil as the new growing medium.
3. Choose a pot of appropriate size, place a piece of tile at the bottom, spread a layer of growing soil, put the Milan plant in the pot, continue to fill the soil, slightly compact it, and water Milan thoroughly.
4. After repotting, place it in a well-ventilated, shady area, water every 2-3 days later, fertilize once a week, and provide 10-12 hours of scattered light daily.
Care for Milan After Repotting
1. Watering
Milan can be watered thoroughly after repotting, then controlled for water. If the environmental temperature is above 25 degrees Celsius, spray water around the plant to maintain humidity.
2. Light
Milan cannot be exposed to the sun immediately after repotting, especially the summer sun. It is best to place it in a semi-shaded area inside the room until it adapts to the environment and recovers its growth before gradually exposing it to the sun.
3. Yellow Leaf Treatment
If Milan's yellow leaves are caused by poor ventilation or excessively dry soil, it is necessary to spray water to maintain environmental humidity and maintain air circulation.
4. Daily Pruning
Milan needs to prune withered and腐烂 roots when repotting. During the growing period, it is also necessary to prune dense and excessive branches to increase ventilation and promote the growth of other branches. After flowering, it is necessary to prune the remaining flowers promptly to enhance overall ornamental value.
The above is an introduction to when it is suitable to repot Milan, which can be used as a reference suggestion for everyone.