Juniperus Dryness and Moisture Judgment Methods and Watering
If you want to know about the methods for determining the dryness and moisture of juniper plants and watering them, the editor will introduce the related content next.
Juniperus Dryness and Moisture Judgment Methods and Watering
When preparing the soil for planting juniper, we can use more substances with good drainage, such as volcanic rocks. Then, on the surface of the soil, bury several large pieces of volcanic rock shallowly. Based on the fact that volcanic rocks appear darker when wet and lighter when dry, dig out the volcanic rocks before each watering and judge the watering time by their color.
How to Identify Dry and Wet Pots for Juniperus
The moisture content of the soil in juniper pots is different, usually dry on top and wet at the bottom. When the surface of the pot soil is very dry, the center of the pot soil is wet, and the lower part to the bottom is wet.
Therefore, accurately determining the dryness and moisture of the juniper pot soil is the prerequisite for deciding whether to water. The dryness and moisture of the juniper pot soil can be expressed in one sentence: look, tap, and lift.
First, the Soil-Pocking Method:Use your finger to dig into the surface soil of the juniper about 3 centimeters deep. If the surface soil is dry, the pot is in a semi-dry state. If there is still a lot of moisture, your finger can clearly feel it, indicating that the soil in the pot is very wet.
Based on the condition of the soil each time you dig, you can calculate the time for each watering.
Second, Soil Preparation Method:When preparing the soil for planting juniper, we can use more substances with good drainage, such as volcanic rocks. Then, on the surface of the soil, shallowly bury several large pieces of volcanic rock. Based on the fact that volcanic rocks appear darker when wet and lighter when dry, dig out the volcanic rocks before each watering and judge the watering time by their color.
Before each watering, dig out the volcanic rocks and judge the watering time based on their color.
Third, Pot-Tapping Method:When determining the dryness and moisture of the juniper soil, use a small stone to gently tap the side of the pot, about in the middle of the total height.
If the sound is crisp, the soil is relatively dry. If the sound is deep, the moisture in the soil is still relatively high.
The above methods are just one way to determine the soil's dryness and moisture, but to actually master the watering time for juniper, it is necessary to consider the environment and season, as well as the alternation of dry and wet soil for the juniper, and adjust the intervals flexibly.
1. In spring and winter, when the soil in the pot sounds crisp or is semi-dry when poked, extend the watering time by about 5 days. The air humidity in spring is high, and the soil is less likely to dry out. In winter, juniper plants are dormant and require less water.
2. In summer and autumn, when the surface soil of the pot is dry, you can water the juniper in the evening of the same day. Be sure to water in the evening after the soil has cooled down in summer and autumn. In high temperatures and dryness, you can spray water 2 to 3 times a day.
The above is all about the methods for determining the dryness and moisture of juniper and watering, for your comprehensive understanding and reference!