How to Build a Grapevine Trellis
The editor will tell you about the green plant flower planting content of how to build a grape trellis, which is a very good experience and knowledge, it is recommended to collect it!
How to Build a Grapevine Trellis
In our lives, many fruit plantings require the construction of a supporting frame, and among fruits, the most common is the grape support frame. In fact, building a scaffold looks simple, but is it really that easy? Do you have any requirements for the construction of grapevine bridges? So today, the editor will take you to understand the construction methods of grape trellises.
Support Preparation
When planting grapes, we need to consider the scaffold. First, we need to prepare the support materials for the construction, which can be wooden stakes, bamboo frames, ropes, wire, or some may be repaired with cement, and some may use steel supports directly. Of course, the most durable is steel, and the cheapest is wooden stakes. If we consider the cost, we usually choose wooden stakes to build the support. Of course, when preparing the scaffold, it is closely related to the topography of the planting site and should be prepared according to different situations.
Installation Time
There is a time to build a grape trellis. It can't be too early or too late. Generally speaking, we have to wait until the grape seedlings grow to about 30 to 50 centimeters before we can set up the support. This period is when the grape seedlings grow the fastest. Moreover, building the trellis at this time is convenient for management, does not easily damage the newly growing grape seedlings, and can also promote the growth of lateral branches through the method of topping.
Installation Method
Grape trellises mainly have two types, namely hedge trellises and pergola trellises. Hedge trellises can be divided into single hedge and double hedge. Single hedge is mainly set up based on the spacing between grape planting rows and then connected each support with wire, which is more suitable for dense planting. Double hedge is basically the same as single hedge, except that each grape has two supports, which can increase the support area, effectively utilize space, but is not convenient for field operations. The scaffold is divided into large scaffold and small scaffold. Generally, the row spacing is greater than or equal to 6 meters, the rear height is 1.5 meters, the front height is 2.5 meters, and the frame length is 10 meters or longer. Small pergolas have a front height of 2 meters and a rear height of 1 meter.
Precautions
First of all, when constructing the support, it is important to ensure that the construction is solid, the stakes should be connected to the ground at a certain depth as much as possible, and check if they are stable. Then, when binding the wire, it should be tied well and not easily come loose. After the scaffold is assembled, we need to test it first to ensure that the scaffold is solid and will not collapse, and then pull the vines onto the scaffold. Finally, when pulling the grape vines, handle them carefully and do a good job of binding.
The construction of the trellis during grape planting is a very important step that has a significant impact on the yield and quality of grapes. Thank you for your long-term support and encouragement of our website.
The introduction of how to build a grape trellis mentioned above is for everyone to learn and understand!