What should I do if the fleshy leaves are soft and wrinkled
Succulent plants are deeply loved for their unique shape, but the leaves often appear soft and wrinkled during maintenance. This not only affects the ornamental value, but may also be a distress signal sent by the plant. This article will systematically analyze the causes from five core dimensions and provide professional solutions. 1. Repair plans for improper water management 1.1 Drought and dehydration treatment skills Long-term water shortage is a common cause of shrinkage of fleshy leaves. When the pot soil is completely dried, the dipping pot method should be used to replenish water: place the pot on a water tray for 2 hours to allow the soil to absorb water evenly. A small amount of surface watering was added the next day, and the rhythm of water supply was gradually restored for 3 days. 1.2 Emergency treatment of stagnant water and rotten roots. If it is found that stagnant water at the bottom of the basin has caused root rot, it is necessary to remove the basin immediately for inspection. Use disinfectant scissors to cut off the blackened roots and retain new white roots with a diameter of ≤2 mm. After drying the roots for 48 hours, repot them with red jade soil + perlite (7:3). 2. Scientific transition during the environmental adaptation period. Meat is particularly sensitive to changes in light intensity. When switching between spring and autumn seasons, the principle of "adding 1 hour of light per day" should be followed gradually. In summer, a 30% sunshade net needs to be set up to buffer strong light, and in winter, you need to transition on the balcony for 3-5 days before entering the room. 3. Deep maintenance of the root system 3.1 Root pruning operation specifications When pruning rotten root systems, keep the main root length ≥3cm, and apply charcoal powder to the incision to prevent infection. After pruning, place it in a ventilated and astigmatic place, and wait until the incision completely heals (about 5-7 days) before placing it on the basin. 3.2 Selection of pot change timing The best pot change period is when the night temperature in spring and autumn is stable at 15-20℃. The diameter of the new basin should be 2-3cm larger than that of the original basin to avoid excessive space causing water accumulation. 4. Common complications To prevent and control scale insect diseases that may occur with soft wrinkles of leaves, a 75% alcohol cotton swab can be used to accurately kill them. At the same time, brassinolide (diluted 2000 times) is applied once a month to enhance stress resistance. 5. Establish a long-term maintenance mechanism and establish a maintenance log to record the watering cycle, and use the bamboo stick method to regularly detect soil moisture. A watering cycle of 15-20 days is maintained in spring and autumn, extended to 25-30 days in summer, and water supply is stopped during winter hibernation.
Through a systematic maintenance program, 90% of fleshy leaf problems can recover within 2-3 weeks. The key is to establish a complete response process of "observation-diagnosis-intervention" and cooperate with regular basin rotation (90° rotation every half month) to ensure balanced development of plant type.