How to make the巴西木 (Brazil wood) germinate quickly
If you want to know how to make Brazil wood germinate quickly and the flower cultivation tips for raising Brazil wood at home, the following introduction is provided by the editor of this site for everyone.
Appropriate temperature: Adjust the maintenance temperature to 20~30℃, quickly reduce the temperature when the summer temperature is high, and take measures for winter cold protection.
Proper lighting: Place the plant in a bright area to receive more sunlight, and provide shading during the intense sunlight of summer.
Ensure humidity: Control the air humidity at 70-80%, and spray water on the plant to keep it moist when the climate is too dry.
Control water level: Do not add too much water, just keep the water level above the bottom of the wooden stake, as excessive water level can cause the stake to rot.
One, Appropriate temperature
Place the Brazil wood in a warm environment and suggest adjusting the temperature to between 20~30℃. Within this range, Brazil wood grows faster and is more likely to germinate. Special attention should be paid to summer and winter, where cooling and warming measures are necessary to keep the temperature below 30℃ using methods such as spraying water and ventilating. In winter, keep the temperature above 10℃ to avoid slow growth due to low temperature.
Two, Proper lighting
During the germination period, Brazil wood requires sunlight exposure. It should be placed in a bright location during spring, autumn, and winter. Avoid excessive exposure to strong sunlight, as too much direct sunlight can dry out the plant and affect germination. Do not place it in a dark environment, as insufficient lighting makes it difficult for new buds to grow.
Three, Ensure humidity
During the period when new buds are growing, the humidity in the maintenance environment should be guaranteed. An air humidity of 70-80% is most conducive to the growth of new buds. When the air humidity is low, spray more water on the plant and its surroundings. You can also cover the plant with a plastic bag and open the bag for ventilation for 3-4 hours each day, which can also increase the maintenance humidity. Be cautious not to cover the stake with a plastic bag for too long, as it can easily lead to rot.
Four, Control water level
During the cultivation process, the water level should be controlled properly and not too high. Just keep the water level above the bottom of the wooden stake. If the water level is too high, the stake is more likely to rot. When the water level decreases, add water as needed. Initially, change the water frequently, and after new buds appear, reduce the frequency of water changes. When changing to new water, you can add a few drops of nutrient solution to supplement nutrients and promote faster growth of new buds. Do not add too much nutrient solution, as excessive nutrients can cause fertilizer damage and lead to stake rot.
The above is the complete introduction on how to make Brazil wood germinate quickly and the tips for raising Brazil wood at home, for everyone to learn and understand!