Multi-layer cactus grafting on Disocactus
Let me introduce to you the topic of family flower cultivation of cacti, multi-layer cactus grafting on Disocactus, and let's get to know more about it together.
Grafting Disocactus onto a multi-layer cactus is actually very easy, and it only involves repeating several grafting steps. The most important thing is to find a good rootstock (multi-layer) and then secure it with some equipment.
Let's first take a look at some preliminary pictures of multi-layer cactus grafting on Disocactus, which will help flower enthusiasts understand the basic grafting patterns.
Here are the details of the grafting process: the first step is to disinfect the cutting knife, the grafting seedling, and the cactus with alcohol-soaked cotton wool. This step is very important and cannot be omitted, otherwise, the wound will rot.
Selection and treatment of scion:
It is best to choose a strong Disocactus that is not too old or too tender, as this can increase the success rate of the grafting.
Step two: After the alcohol has dried, we can start to remove the epidermis from the grafting seedling. Generally, remove 0.8 to 1 centimeter of epidermis on both sides. Note: When removing the epidermis, do not pare too long, otherwise, there will be wounds left outside, and the grafting seedling will rot. Also, do not pare too thickly as not to damage the stem in the middle of the grafting seedling, otherwise it will become soft and not easy to graft, and will also affect growth and appearance.
Step three: Make an incision on the disinfected part of the cactus, with the tip of the cutting knife pointing downward. The incision should be small on the inside and wide on the outside, in the shape of an inverted triangle, with a depth of about 2 to 3 centimeters and a width of about 2 to 3 centimeters on the outside (specifically depending on the width of the grafting seedling).
Step four: Insert the grafting seedling into the incision, taking care not to use too much force, or the grafting seedling may break. I usually widen the incision with the cutting knife and then quickly insert the grafting seedling (you can try this). Note: Make sure that the incision of the grafting seedling is completely inserted into the incision of the cactus without any wound left outside. After insertion, gently pull the grafting seedling with your hand; if it feels tight and does not shake, it indicates a good fit. Then press the incision with your hand for 3 seconds to observe whether the grafting seedling is extruded. If not, it is successful; if it is extruded, it indicates a poor fit, and you can pull it out and insert it again.
Step five: After completing the above four steps, the simple grafting is basically done. The rest is to see what kind of grafting result you need. If you do not want the cactus to grow taller, you can cut off the top and insert the grafting seedling in the same way, which will also look very beautiful.
If the temperature is below 20℃ during grafting, you can put a large plastic bag over the grafted cactus to keep it warm! After all the incisions have healed, you can remove the bag, usually in about two weeks.
This article shares the related content of multi-layer cactus grafting on Disocactus (with pictures), hoping it is helpful to you!