Cultivation Method Summary of the White Phoenix Succulent Plant
A small knowledge of life, introducing the experience of the green plant maintenance aspect of the cultivation method summary of the White Phoenix succulent plant, the following is a comprehensive introduction.
Cultivation Method Summary of the White Phoenix Succulent Plant
White Phoenix is a larger rosette plant, with the largest diameter of the leaf surface exceeding 20 centimeters, and it can tolerate full-day sunlight. From spring to autumn, it is a refreshing light green, and under the coverage of white powder, it will have a bluish feeling. Here are some cultivation methods for the White Phoenix, let's take a look together.
White Phoenix Cultivation Methods
1. Light:
The White Phoenix succulent enjoys full-day light, usually green. When the duration of sunlight increases, it turns red. In summer, with high temperatures, it prefers shade, good ventilation, and controlled watering. In winter, keep the potting soil dry. It belongs to the spring and autumn type, growing only in spring and autumn, and be sure to take care during the high summer temperatures, otherwise it can easily die.
2. Watering: The White Phoenix succulent does not require too much water. There is a thin layer of white powder in the center of the leaves, which looks very beautiful. When watering, avoid the center of the leaves to prevent affecting their appearance. Watering twice a month is fine. Due to the differences in seasons, climate, and regions, the maintenance methods differ. Generally, watering is done after the soil is dry.
3. Propagation: The propagation of the White Phoenix succulent is mainly through leaf cuttings, and it can also be done through stem cuttings. Survival is easy.
It should be noted that although the White Phoenix likes light, it should not be exposed to direct sunlight. The White Phoenix does not require a lot of water. Avoid watering from above, otherwise the leaves can easily wither. There is a thin layer of white powder in the center of the leaves. When watering, avoid the center of the leaves to prevent affecting their appearance.
White Phoenix Leaf Cutting Steps
1. Take the leaves
The leaves should be removed from the base. Gently hold the leaf with your hand and摇动 (shake) it left and right a few times, and the leaf can be removed.
2. Dry the leaves
After removing the leaves of the White Phoenix, place the leaves in a shaded, well-ventilated area to dry, allowing the wound to heal. After the wound has healed, insert the leaves to prevent rot.
3. Fill the soil
Put soil into the prepared pot, filling it slowly, being careful not to overfill and to make the soil smooth.
4. Leaf insertion
Arrange the prepared leaves one by one. The leaf surface direction should be top to bottom.
5. Wait
The survival rate of White Phoenix cuttings varies with climate and maintenance methods. Be patient.
White Phoenix Wintering Methods
In winter, temperatures drop and daylight hours shorten. To keep the White Phoenix safe during winter, it is necessary to maintain the temperature. If the temperature is too low, frostbite can occur. The White Phoenix can be exposed to full-day light in winter. Watering cannot be stopped in winter. If the temperature is below 0 degrees, the roots can be slightly moist. Avoid flooding and spraying to prevent leaf damage.
The above shares a detailed introduction of the cultivation method summary of the White Phoenix succulent plant, for netizens to refer to and learn from.