Wax wood watering method
As a star variety among succulent plants, waxen wood is favored by gardening enthusiasts for its unique waxy skin and drought-tolerant characteristics. However, many novices often cause damage to their plants due to improper watering during maintenance. This article will help you master the gold standard for waxwood watering through the four seasons watering rules and advanced techniques. 1. Water cycle management of Asian wax wood in four seasons 1. Dynamic water replenishment during the growth period (spring and autumn) When the environmental temperature is maintained at 15-28℃, waxy wood enters a rapid growth period. Adopt the principle of "dry through pouring through" and use a bamboo stick inserted into the basin soil for testing: When 3 cm below the basin soil is completely dry, slowly inject water along the basin wall until the drainage hole seeps. It is recommended to water every 7-10 days. Do it in the morning to avoid water in the leaf heart. 2. Extreme weather water control strategy (summer and winter) When high summer temperatures (>35℃) and low winter temperatures (<10℃), wax wood will enter a dormant state. At this time, the watering interval should be extended to 20-30 days, and only 1/3 of the normal water volume should be given each time. Pay special attention to the need to completely cut off water seven days before the arrival of the cold wave to prevent freezing damage and rotten roots. 2. Advanced operating specifications for waxwood watering 1. The precise water control technology adopts the weight comparison method: the weight of the drying basin is recorded as the benchmark value, and the weight increase after watering shall not exceed 30% of the original weight. Use a pointed spout to inject water along the edge of the basin to ensure even water penetration. Avoid "half water" causing the top to become wet and the bottom to dry. It is recommended to control the duration of each watering to 15-20 seconds. 2. Collaborative management of air humidity is combined with root watering for foliar micro-spraying. Use an atomized spray can to spray 50cm away from the plant, and maintain 40%-50% environmental humidity 2-3 times a week. In the rainy season, it is necessary to turn on the circulation fan to enhance ventilation. Special reminder: Avoid direct strong light for 4 hours after spraying water. 3. Supporting maintenance enhancement system·Soil matching plan: volcanic rock/vermiculite/peat soil is mixed in a ratio of 5:3:2·Water quality requirements: tap water or rainwater is preferred to stand for 3 days·Basin selection: Red pottery pots are preferred, diameter is 2-3cm larger than the plant·Light matching: After watering, it is necessary to ensure that scattered light for 4 hours per day can be used to grasp the watering rhythm and supporting maintenance of the wax wood through the system, and cooperate with observing the plant condition (the best is a fullness of 85%) to cultivate a rich wax layer and compact plant type. Excellent plant. It is recommended to record a watering log every month and gradually establish a personalized maintenance plan.