What to Do When Buddha Bead Succulents Rot
Buddha bead succulents are loved for their round and plump leaves, but improper care can lead to root rot issues. This article will systematically analyze the key points of caring for Buddha bead succulents from three dimensions: environmental control, soil management, and water control.
I. Environmental Control and Temperature Management
1. Causes of Root Rot in High Temperatures
The suitable growth temperature for Buddha bead succulents is between 15-28°C. When the environmental temperature exceeds 32°C, their roots enter a dormant state. Prolonged high temperatures cause cell membrane rupture, manifesting as typical root rot symptoms such as transparent leaves and softened stems.
2. Four-Step Cooling Plan
① Set up a sunshade net to block direct sunlight ② Maintain more than 4 hours of air circulation daily ③ Place陶粒 (ceramsite) on the ground as a cooling layer ④ Use a circulating fan to assist in heat dissipation
II. Soil Improvement and Root Repair
1. Optimal Soil Mixing Ratio
It is recommended to use a mixed matrix of peat soil: perlite: vermiculite in a ratio of 3:5:2, ensuring a permeability rate of over 80%. Regularly test soil moisture with a bamboo skewer, and it is best if there is no stickiness after 5 minutes.
2. Potting Operation Standards
① Retain 1/3 of the protective soil after unpotting ② Trim the blackened and rotten roots until white tissue is exposed ③ Soak in a potassium permanganate solution for 15 minutes to disinfect ④ Use damp soil after drying in the shade for repotting
III. Scientific Watering and Humidity Control
1. Determining Watering Schedule
In spring and autumn, follow the principle of "thoroughly wet after drying out." In summer, switch to "slightly moist rehydration," and keep the soil dry in winter. You can determine the watering time by the pot's weight: water when it is 2/3 lighter.
2. Key Points of Humidity Management
Use a humidifier to maintain an environmental humidity of 40-60%, avoiding direct spraying on the leaves. It is recommended to use the immersion pot method to supply water, controlling each immersion session to 30 seconds or less.
Caring for Buddha bead succulents requires mastering the three key elements of temperature, soil, and water. In summer, focus on shading and ventilation, change pots and repair roots promptly when root rot is detected, and follow the principle of "better dry than wet" when watering. Regularly observing the plant's condition can effectively prevent rotting issues.