Propagation Methods and Precautions for Glass Jade
The knowledge about the propagation of Glass Jade plants, brought to you by the editor, includes detailed explanations on the methods and precautions below.
Propagation Methods and Precautions for Glass Jade
Propagation of Glass Jade can be done throughout the year in a suitable temperature environment, but it is easier to survive during the plant's growing period. The matrix for propagating Glass Jade should be a sandy soil that is relatively loose and breathable. Choose sturdy branches that are one to two years old, and gently insert the cuttings into the holes made on the matrix using a small bamboo stick or wooden stick.
Introduced as a species of the Impatiens family, Glass Jade is a common flower in homes, preferring a warm and humid growing environment. Glass Jade can be propagated through cuttings and can be rooted in both soil and water.
Propagation Time for Glass Jade
Propagation of Glass Jade can be done all year round in a suitable temperature environment, but it is easier to survive during the plant's growing period. As Glass Jade grows slowly in winter and summer, it is not suitable for propagation during these seasons. It is best to propagate in the cool and mild spring and autumn seasons.
How to Propagate Glass Jade
1. Propagation Matrix
The matrix for Glass Jade propagation should be a sandy soil that is relatively loose and breathable. You can choose fine river sand, peat soil, or clean sawdust. These materials should be sterilized at high temperatures before use and can be used separately or mixed. After sterilization, fill them into hole trays or flower pots and spray thoroughly with water before use.
2. Cutting the Stem
For Glass Jade cuttings, choose sturdy branches that are one to two years old, leaving two to three nodes on each cutting. Cut the lower end of the cutting into a V-shape, remove the bottom two leaves, and retain only a small top leaf. The cuttings should be inserted immediately after cutting and should not be left to wilt.
3. Insertion Operation
The cuttings of Glass crabapple are brittle and delicate, so they should not be inserted directly into the matrix. Instead, make some holes in the matrix with a small bamboo stick or wooden stick, and then gently insert the cuttings into the holes. After insertion, spray the cuttings thoroughly with water and place them in a well-ventilated area with weak light for care.
Precautions after Propagation of Glass Jade
After propagation, Glass Jade should be placed in a shady and well-ventilated area to avoid direct sunlight. For water propagation, change the water every 4 days in summer and every 5-6 days in spring and autumn, using fresh water that has been exposed to air.
The comprehensive explanation of the propagation methods and precautions for Glass Jade provided above can help you.