Best time to propagate begonia cutting
Answering netizens' questions about the best month for begonia cutting propagation, please refer to the detailed introduction below.
Best time to propagate begonia cutting
Begonia can be propagated in spring, summer, and autumn, but the best time is still in early spring when it starts to recover and produce branches. The environmental temperature and air humidity at this time are relatively suitable, resulting in a higher survival rate. After cutting, water thoroughly and care in a semi-shaded environment, avoiding direct sunlight. Only after the roots have formed can the duration of sunlight exposure be increased.
Begonia cutting time
Begonia can be propagated in spring, summer, and autumn, but the best time is still in early spring when it starts to recover and produce branches. The environmental temperature and air humidity at this time are relatively suitable, resulting in a higher survival rate.
Begonia cutting methods
Begonia cutting is divided into hardwood cutting and softwood cutting.
One, hardwood cutting: Select 1-year-old healthy branches, 0.5-1 cm in diameter, cut to a length of 12-14 cm, then inserted into the soil, water thoroughly, and cover with plastic film for insulation and moisture retention. The film should be removed for ventilation once a week, and roots can form in about 40 days. Transplantation can be done after autumn.
Two, softwood cutting: Begonia softwood has a strong metabolic function but poor stress resistance, and it has strict requirements for technique and environment.
1. Cutting substrate preparation: Begonia grows well in soil with good drainage. The water-permeable layer can be made of coal cinder, gravel, or coarse sand, covered with 15 cm of fine river sand. The soil and pot should be sterilized before cutting.
2. Cutting time and cutting selection: The best time for softwood cutting is from May to August, with June being the best. Select robust semi-woody branches without diseases and pests from young parent plants as cuttings, 10-15 cm in length. Remove lower leaves, retain upper leaves, and applying rooting powder before cutting can greatly improve the survival rate.
Notes for begonia cutting
After cutting, begonia should be cared for in a semi-shaded environment, avoiding direct sunlight to prevent rapid water evaporation and wilting, which may affect root formation. It is necessary to increase the duration of sunlight exposure only after the cuttings have rooted.
Post-cutting care management for begonia
1. Water immediately after cutting to promote close contact between the branches and the substrate, then reduce watering, and spray water appropriately to maintain environmental humidity. Generally, spray 2-3 times a day, or 3-4 times in high temperatures.
2. Avoid direct sunlight after cutting begonia and use a shade net to provide shade. Only after the roots have formed can the duration of sunlight exposure be increased.
The detailed explanation of the best month for begonia cutting propagation shared above is for everyone's reference and suggestion only!