Abstract: Cuttage is a very common method of reproducing plants, and Milan, as a shade-tolerant and highly adaptable plant, its cuttage is also very easy to succeed. But many people are not very clear about the time and method of cuttage in Milan. This article will introduce in detail the time and method of cuttage in Milan,...
Cuttage is a very common method of reproducing plants, and Milan, as a shade-tolerant and highly adaptable plant, its cuttage is also easy to succeed. But many people are not very clear about the time and method of cuttage in Milan. This article will introduce in detail the time and method of cuttage in Milan, making it easy for you to master this skill.
1. The best time for cuttage in Milan is in spring and summer. The best time for cuttage in Milan. At this time, the temperature is suitable, the humidity is high, and the nutrients are sufficient. At the same time, during this season, Milan grows faster and can adapt to the new environment more quickly.
2. How to choose cuttage materials. Milan's cuttage materials can choose stem tips or leaves. If you choose a stem tip, choose a stem tip that grows vigorously and is not affected by pests and diseases; if you choose leaves, choose larger, complete leaves that are not damaged.
3. How to deal with cutting materials After the cutting materials are selected, they need to be processed. If you choose a stem tip, remove the lower few leaves of the stem tip, clean the rest, and remove flower buds if there are any. If you choose leaves, cut off the lower 1/3 of the leaves, and the size of the leaves should be selected according to the size of the cuttage pot. After processing, leave an oblique angle at the bottom of the material to facilitate insertion into the soil.
4. How to choose the cutting pot The size of the cutting pot should be selected according to the size of the selected cutting material, and also take into account the nutrients and water needed for plant growth after cutting. There should be drainage holes at the bottom of the cuttage pot to avoid excessive water.
5. How to prepare cuttage soil The cuttage soil should choose loose, breathable, and well-drainage soil, and add some sand and legular soil to the soil, which can increase the ventilation and fertility of the soil.
6. How to conduct cuttage Insert the cuttage material into the cuttage soil at a certain spacing (about 3 - 5cm), and be careful not to insert it too deep or too shallow. The depth of insertion should be kept at about 1/2 of the material, while leaving a certain space to facilitate the growth of plants.
7. How to water After cutting, water the appropriate amount to make the soil moist but not too much. Spray water mist once every morning and evening to increase humidity and promote plant growth.
8. How to carry out maintenance after cutting, pay attention to maintenance and avoid direct sunlight and wind drying. You can place some moist stones or pebbles around the cuttage pot to increase humidity and prevent plants from running short of water.
9. How to judge whether cuttage is successful Generally speaking, it takes about 2 - 3 months for successful cuttage in Milan, and this time must also be adjusted according to changes in seasons and climate. Whether it was successful can be judged by observing the growth of the cuttage material. If new leaves or new buds are found to grow, it means that the cuttage was successful.
10. How to transplant When the cuttage seedlings grow to a certain height, you can consider transplanting. When transplanting, select soil suitable for plant growth and transplant seedlings into the soil, while paying attention to maintaining humidity and avoiding direct sunlight.
11. How to prune When the seedlings grow to a certain height, you can consider pruning. Pruning promotes plant growth and reproduction, while also maintaining the beautiful appearance of the plant.
12. How to apply fertilizer after cutting, apply appropriate amount of fertilizer, choose fertilizer suitable for the growth of Milan, and apply fertilizer according to the season and plant growth.
13. How to prevent and control pests and diseases During the cutting process in Milan, pests and diseases must be controlled in a timely manner. You can choose some natural control methods, such as spraying vinegar water, pepper water, etc., and you can also use some plant protectants, but pay attention to the use method and dosage.
14. How to carry out winter maintenance In winter, Milan needs special maintenance to avoid being affected by low temperatures, dryness and cold winds. You can choose indoor maintenance or use anti-freezing covers outdoors for protection.
15. Cutting in Milan is a simple and interesting thing. As long as we master the right time and method, we can easily carry out cutting and enjoy the fun of reproducing plants. At the same time, Milan is also a very suitable plant for interior decoration and can make our home more beautiful.