How to propagate gardenias: A clever trick for rooting gardenias through water propagation.

How to propagate gardenia cuttings

A small experience in plant cultivation about how to propagate gardenia cuttings and the ingenious method of rooting gardenia cuttings in water, with the specific content as follows:

In addition to soil cultivation, gardenias can also be grown hydroponically, and hydroponic gardenias are more aesthetically pleasing than soil-grown ones. Below is a detailed introduction on the method of hydroponic rooting for gardenias.

1. Choosing branches

The branches suitable for hydroponic propagation of gardenias should be healthy, disease-free ones, which can be at the tip or the middle of the branch. Note that the branches should not be too weak or thin; only strong and healthy branches are more likely to root and survive during hydroponic culture.

2. Trimming branches

Remove all leaves from the bottom of the branch and cut the bottom cut into a slanted surface. Leave only 1-2 leaves at the top of the branch for photosynthesis; too many leaves will cause excessive evaporation and are not easy to survive. Moreover, it's best to have 3 nodes at the top of the branch. If the middle part of the branch is used, the top cut of the cutting should be cut straight, while the bottom cut should still be cut diagonally.

3. Water and container

The container for hydroponic culture must be cleaned thoroughly, with no dirt on the inside and bottom. It's best to use purified water; if not available, tap water can be used. If tap water is used for cultivation, it should be stored in advance to dissipate the chlorine.

4. Hydroponic cutting

Insert the cutting into the water. If you want to keep the branch upright, you can choose a specialized hydroponic container with a mesh. If there is no specialized container, you can place a piece of foam on the container opening and make some holes in it, allowing the cutting to enter the container through the small holes for hydroponic culture. When the cutting has not yet developed roots, change the water every 1-2 days. After about 10-15 days, the cutting can root. Cuttings that have not rooted do not need to use nutrient solution.

The detailed explanation of how to propagate gardenia cuttings and the ingenious method of rooting gardenia cuttings in water introduced above, hopes this article can bring you some help in green plant management!