What to Do About the Hollow Roots of Clivia Miniata
Let me share with you how to deal with the hollow roots of Clivia Miniata and the detailed explanation of the remedial methods for Clivia Miniata's hollow roots in the field of green plants and flowers. If there are any mistakes, please feel free to correct them!
Repotting and Pruning: Remove the Clivia Miniata from the pot, cut off the hollow roots, and soak them in a fungicide solution for disinfection, then dry them before replanting.
Preparing the Substrate: The substrate can be made of decomposed leaf soil, pine needles, garden soil, and coarse sand. The substrate should be loose and not compacted.
Planting: Place broken tiles at the bottom of the pot, then put the substrate into the pot, and plant the treated plant.
Repotting and Care: Water it once to settle the roots, maintaining the soil in a moist state. Later, water thoroughly, avoiding partial watering.
I. Repotting and Pruning
When Clivia Miniata has hollow roots, it needs to be cleaned out of the pot, the hollow roots pruned, then soaked in a fungicide solution for a while to disinfect, and finally placed in a ventilated area to air dry before replanting.
II. Preparing the Substrate
Hollow roots in Clivia Miniata are usually caused by improper watering. If the roots are not exposed to water for a long time, some will become hollow. This is closely related to regular watering and soil drainage. Therefore, when preparing the soil, it must be evenly mixed, avoiding half-loose and half-dense conditions, as water will flow along the loose side, leaving the other side without water for a long time. The soil should be mixed evenly with uniform particles before potting. The general substrate mixture consists of decomposed leaf soil, pine needles, garden soil, and coarse sand.
III. Planting
When planting, first place a layer of broken tiles or coal slag at the bottom of the pot as a drainage layer, then add a layer of soil before placing the Clivia Miniata with dried roots into the pot. Gradually add soil to the pot to stabilize the plant, gently pull up the plant to straighten its roots, and then press down gently.
IV. Repotting and Care
After repotting, immediately water it once to settle the roots, keeping the soil moist to help it recover faster. In later care, avoid partial watering. Otherwise, the top layer of the soil may be moist, but the bottom layer will remain dry, preventing the roots from absorbing water, which can lead to hollow roots over time. Therefore, when watering, make sure water flows out of the bottom of the pot.
This article shares how to deal with the hollow roots of Clivia Miniata and a detailed introduction to the remedial methods for Clivia Miniata's hollow roots. I hope you will like it!