How to make green radish quickly burst into the basin
As an evergreen tree in the indoor green planting world, Green Rose is deeply loved for its tenacious vitality and unique ornamental value. However, many flower lovers find that their green radishes are always in a "sparse" state. This article will systematically analyze the underlying logic of green radishes bursting pots and help you unlock the mystery of the crazy growth of vines through four major maintenance dimensions. Light control: The golden rule of photosynthesis scattered light environment construction skills Although green radish is resistant to shade, soft light for 3-4 hours a day can significantly increase chlorophyll activity. It is recommended to place it 1.5 meters away from the east-facing/north-facing window and use a gauze curtain with a transmittance of 40-60% to adjust the light intensity. Seasonal light management Direct light in the morning can be accepted in spring and autumn (before 9 o'clock). In summer, special attention should be paid to avoid strong ultraviolet rays from 11 to 15 o'clock. In winter, the filling light should be extended to 6 hours/day. LED plant lights can be used for manual filling light. Temperature control strategy: The key code for root development maintains the golden temperature band of 22±2℃, and in winter, the night temperature must be greater than 12℃. Use intelligent temperature-controlled flowerpots or lay ceramsite insulation layers. When cooling down through the atomizing and humidifying system in summer, pay attention to maintaining air circulation to avoid the growth of mold. Water and fertilizer management: The energy code for burst pot growth adopts the "sandwich watering method": spread vermiculite on the bottom of the basin → middle layer of nutritious soil → surface pine scales. During the growth period (March to September), water-soluble fertilizer with nitrogen, phosphorus and potassium =10-5-5 is applied every 15 days, combined with composting rice washing water irrigation once a month, can increase the growth rate of aerial roots by 40%. Shape pruning: The artistic technique of shape control implements the "three-level pruning method": the first level is to cut off old yellowed leaves, the second level is to shorten long branches (retaining 3 bud points), and the third level is to cut overlapping branches. Spray EM bacterial solution immediately after pruning, and combine with rotating flowerpot (45° per rotation) to achieve a three-dimensional pot explosion effect.
Through the above-mentioned systematic maintenance plan, combined with regular inspections of soil EC value (controlled at 1.2- 1.8 mS/cm) and PH value (5.5-6.5), a 200% increase in crown width can usually be achieved in 6-8 months. It is recommended to take growth records every month and dynamically adjust the maintenance plan.