How to Build a Sunlight Rose Grape Greenhouse
Sharing knowledge on how to build a sunlight rose grape greenhouse. Corrections are welcome if there are any mistakes!
How to Build a Sunlight Rose Grape Greenhouse
Sunlight rose grapes can be grown in simple rain shelters, single-span plastic greenhouses, and multi-span plastic greenhouses. The construction difficulty for each is not very high, but the specific length, width, and number of spans should be determined based on the size of the land. Later considerations should also include the maximum wind load and maximum precipitation capacity.
How to Build a Sunlight Rose Grape Greenhouse
Business Model Planning: The cultivation of sunlight rose grapes requires high soil and environmental standards, even higher technical requirements, and involves significant investment, a large labor force, and considerable management complexity.
Therefore, it is necessary to follow industrialized business concepts with standardized management, standardized cultivation, and procedural operations to produce premium fruits and implement a branding marketing strategy to achieve better economic benefits.
Simple Rain ShelterBuilding a rain shelter can effectively reduce the occurrence of diseases, reduce the use of chemicals, and produce healthy and high-quality fruits.
Main parameters for building a rain shelter are as follows:
Drill a hole 5 cm down from the top of the支柱, pull the top wire from north to south, and fix the top wire at the top of each pillar.
At 40 cm down from the top of the支柱, pull a horizontal wire in the east-west direction.
Use thicker steel wire to connect each pillar in the east-west direction, with both ends fixed on 60 cm deep stakes.
The horizontal wire at both ends of the orchard should be thicker, and it can be slightly thinner in the middle.
Measure 1.1m from the intersection of the two ends of the horizontal wire with the支柱 on both sides to pull the edge wire of the rain shelter, and fix it with each intersecting horizontal wire.
The arches are made of bamboo slats or molded hollow iron tubes, 2.5m long, with one piece every 0.6m, the midpoint of the bamboo fixed on the top wire, and both sides fixed to the edge wire.
Usually, the film can be covered before germination, preferably using a good light transmission anti-drip film, which should be replaced annually, and can be removed after fruit picking.
Single-Span Plastic GreenhouseUsually, the greenhouse is 30m long, 6m wide, with a shoulder height of 1.8m and a peak height of 3m, and the door width is 1.8m. The greenhouse is convenient for operations and is conducive to small-scale mechanized work.
Multi-Span Plastic GreenhouseThe structure is simple and easy to install, but the initial investment is relatively large. Each greenhouse has a span of 6-8m, with the length and number of spans determined by the size of the land, a shoulder height of 2.5-3.5m, a peak height of 4-5m, and a door width of 1.8-2.4m.
Its main features include saving land, good visibility, easy for mechanized operations, ventilation, and wind resistance.
It is also worth considering using the pillars of the multi-span steel frame greenhouse as the grape trellis支柱, which not only saves costs but also facilitates mechanized operations and intercropping.
During planning and design, full consideration should be given to local factors such as maximum wind speed, maximum precipitation, maximum snow load, and maximum high temperature.
The aforementioned planning and design have strong resistance to market and natural risks. No matter what planting model is planned, it is necessary to match it with agricultural machinery as much as possible.
In particular, tractors for trenching and fertilizing, rotary tillers for loosening soil and weeding, and integrated water and fertilizer pipeline systems for fertilizing and watering should be minimized to reduce labor, lower labor intensity, and improve labor efficiency.
The above information on how to build a sunlight rose grape greenhouse can be used for reference by green plant enthusiasts.