How to keep the fragrant wood safe during winter and the complete guide to fragrant wood winter maintenance

How to spend the winter on fragrant wood

As the temperature continues to fall, the maintenance of fragrant wood has entered a critical stage. This plant, which has both ornamental and practical value, requires special skills to be maintained in winter. This article will provide you with a detailed analysis of the five core maintenance points from environmental control to daily management. 1. Create an ideal winter environment Indoor placement strategy When the night temperature is below 5 ° C, it is recommended to move Fragrant Wood indoors. Priority is given to the southbound bay window area to ensure sufficient light and avoid direct contact with the radiator. Special attention should be paid to the northern region. The temperature by the window may drop sharply. It is recommended to place a 3-cm-thick insulation board at the bottom of the flower pot. Accurately control the temperature to maintain the golden winter temperature range of 8-15℃, and use an electronic temperature and humidity meter to monitor in real time. If the room temperature exceeds 18℃, it is necessary to cover the shade properly. When it is below 5℃, it is recommended to use a transparent insulation bag (breathable for 2 hours a day). 2. Collaborative management of lighting and ventilation In winter, the lighting plan ensures more than 4 hours of direct light per day, and the rotating basin method can be used to receive light evenly. Use a full-spectrum fill light in rainy and rainy days, illuminate it 50cm away from the plant, and replenish it for 2-3 hours a day. Scientific ventilation techniques choose to open windows for ventilation at noon on sunny days, for 30-40 minutes each time. Set up wind barriers to keep the air flow rate <0.5m/s. Dry areas in the north can be used with humidifiers to maintain humidity of 40%-60%. 3. The quantitative standard for watering of the precise moisture control system adopts the "three-finger detection method": insert the index finger, middle finger and ring finger into the second joint of the pot soil. Only water can be watered if none of the three fingers feel moist. The water temperature should be consistent with the ambient temperature, and the amount of watering each time should not exceed 1/5 of the pot volume. In special circumstances, it is necessary to set up an insulation layer to deal with the floor heating environment and use the immersion basin method to replenish water. When signs of frostbite appear, immediately stop watering and transfer to an environment of 10 ° C to slow down seedlings.

Through the above systematic maintenance plan, it can not only help fragrant wood survive the winter safely, but also promote the differentiation of new buds in spring. The key is to grasp the three principles of stable environment, sufficient light, and accurate moisture, and cooperate with regular observation and adjustment to make your fragrant wood glow with lasting vitality.