How to Make the Tiplant Root Quickly
As a beloved ornamental plant, the propagation process of the tiplant often confuses新手 gardeners. This article will systematically analyze the complete plan to promote tiplant rooting, from environmental control to the use of agents, along with practical illustrations to teach you how to cultivate strong root systems.
Ⅰ. Three Key Elements to Promote Tiplant Rooting Quickly
1. Optimal Environmental Parameter Settings
Controlling the temperature between 18-22℃ is ideal, and insulation measures are required in winter. Use a mixture of perlite and decomposed leaf soil at a ratio of 3:2 to ensure good drainage and aeration. Maintain the substrate moisture at around 60%, and you can insert your finger 2cm to feel the moisture.
2. Scientific Use of Rooting Agents
It is recommended to use rooting powder containing naphthylacetic acid. Before treatment, the cut should be diagonally cut at a 45-degree angle. The powder formulation can be directly dipped on a 0.5cm cut section, and the liquid formulation is suggested to be diluted to 800-1000 times. After treatment, let it dry in the shade for 30 minutes before potting.
3. Key Points of Post-Treatment Care
Place the pot in a scattered light environment after potting and avoid fertilizing for the first two weeks. Rotate the pot weekly to ensure even light exposure, and when three new leaves have unfolded, you can start applying a diluted foliage plant nutrient solution at 2000 times.
Ⅱ. Full Analysis of Rooting Powder Soaking Operation
1. Concentration and Time Conversion Table
Soak in a 1000ppm solution for 8-12 minutes, an 800ppm solution for 15-20 minutes, and a 500ppm solution for 25-30 minutes. In high summer temperatures, reduce the soaking time by 20%, and in winter, extend the time by 10%.
2. Operation Precautions
The best time for treatment with the agent is between 9-11 am. For thick stems with a diameter of more than 2cm, vertical scoring is required. After soaking, rinse the remaining solution with water, and let it dry until a protective film forms on the cut before planting.
By accurately controlling environmental parameters and scientifically using rooting agents, the success rate of tiplant rooting can be increased to over 90%. It is recommended to check the root development monthly and adjust the care plan in a timely manner to allow your tiplant to quickly develop a robust root system.