How to plant mushroom spawn bags
Summary: This article discusses how to plant mushroom spawn bags and related content about home cultivation methods for green plants. Keep reading for more information!
Ingredients: Use wheat, rice bran, gypsum, lime, or straw, wheat, wheat bran, gypsum powder for preparation.
Soaking: You can soak in lime water for about 9 hours, or soak in clean water and then boil and cool.
Bottling: Fill the ingredients into glass containers with 200-300g and disinfect for 2-2.5 hours.
Cultivation: Use multi-point inoculation, inoculate 3-4 points around the culture material, then add small pieces of spawn, and adjust the temperature to about 24-28℃.
I. Mushroom Spawn Bag Planting Method
Ingredients: When planting mushroom spawn bags at home, there are not only one type of ingredients, usually there are three types. The first type: wheat or barley 88%, rice bran or wheat bran 10%, gypsum or calcium carbonate 1%, lime 0.5%, moisture content 65%. The second type: mixed sawdust 42%, mixed wood shavings 42%, rice bran or wheat bran 15%, magnesium sulfate 0.2%, gypsum or calcium carbonate 1%, moisture content 70%. The third type: straw 64%, wheat 25%, wheat bran 10%, gypsum powder 1%, moisture content 65%-70%.
Soaking: When soaking, you can use clean water or lime water. Soak with 1% lime water at a water temperature of 25℃, soak wheat for 8-9 hours, barley for 9-10 hours, and if the water temperature is high, the time can be appropriately shortened. After soaking, gently pinch the wheat to create a depression, but the fingerprint should disappear quickly. Clean water soaking and lime water soaking time is the same, drain the water, boil in a pot and cool after taking out.
Bottling: After soaking, transfer the ingredients to glass bottles, do not add too much to each bottle, about 200-300g is fine, then disinfect under 1.3-1.5 kg/square meter pressure for 2-2.5 hours. During disinfection, be careful not to let the time be too long, otherwise the wheat grains can become糊-like, which will hinder the growth of mycelium.
Cultivation: Multi-point inoculation is often used, inoculate 3-4 points around the culture material in the container, then add small pieces of spawn, and maintain the temperature at about 24-28℃ for 7-10 days. When the mycelium grows to a diameter of about 4cm, manually stir to promote faster growth.
II. Purchasing Spawn Bag Planting Method
Purchasing Spawn Bags: For home mushroom spawn bag cultivation, you can first purchase mushroom spawn bags, pull the bag opening up, tie it loosely to the bag with a rubber band, do not tie the bag opening too tightly, and avoid direct sunlight. Before the spawn bag fruits, you need to spray the bag with water every day, making sure not to spray water on the spawn surface to avoid damaging the mycelium growth. After spraying, place it in a dark and humid place, as this environment is most conducive to its growth.
Watering Maintenance: Fill a basin with water and place stones or bricks in it, making sure some parts are above the water surface, then place the mushroom spawn bag on top. If the stones are not above the water surface, the spawn bag can easily mold. During the growth period of the mushroom spawn bag, be careful not to place it in a windy position. After the spawn bag germinates, fold the bag opening inside out and spray water daily, and it can be harvested soon.
This article shares the full content of how to plant mushroom spawn bags and related home cultivation methods, hoping it can help you. Also, we hope everyone comes to see more green plant and flower experience and common sense!